Vacuum Deaerator for Sugar Syrup and Liquid Concentrate Processing
Syrup deaerator vacuum pump
,Concentrate deaerator vacuum pump
,Syrup deaerating feed tank
A vacuum deaerator removes air and dissolved oxygen from liquid products and process water under vacuum. Deaerating the product liquid inhibits browning and the oxidation of pigments, vitamins, and flavor components, removes the micro gas bubbles attached to suspended particles that make them float, prevents foaming during canning and high-temperature sterilization, and reduces corrosion on the inner walls of containers and system components.
In water systems, removing oxygen lowers aerobic corrosion and extends equipment life, and removing gas keeps heat exchanger surfaces free of attached bubbles so that heat transfer efficiency is maintained.
The machine features an adjustable vacuum level with a dedicated vacuum breaking device, an inclined inlet that forms a vortex to improve the deaeration effect, an inclined outlet that keeps the discharge stable under vacuum, and a working time and cycle that can be adjusted to the requirement. Size levels cover processing capacities from 1,000 to 10,000 L/H for reference, and the detailed parameters are confirmed with the buyer according to the process.
Sugar syrup and liquid concentrates carry dissolved oxygen that works on the product during holding, dilution, and carbonation. Browning in concentrated liquids is one of the visible results, and the same oxidation affects flavor over time. Deaeration removes the dissolved oxygen before the syrup moves to the carbonation or dilution step, so that the base liquid arrives with a controlled oxygen background.
High-concentration liquids behave differently under vacuum from thin liquids: too deep a vacuum can draw off water or raise foam, and the treatment has to match the concentration of the product. The vacuum level is adjustable over approximately -0.098 to -0.08 MPa so that the setting can be chosen for the syrup, the working time and cycle are adjustable to the batch, and the dedicated vacuum breaking device brings the tank back to atmosphere in a controlled way between cycles.
Plants that produce several syrup varieties run the deaerator through a changeover routine between products. The working cycle is adjusted for each variety, and the cleaning arrangement, including the rinse of the product-contact parts, is confirmed with the buyer for the product range of the plant. The inclined inlet vortex and the inclined outlet keep the feed and discharge stable at every vacuum setting.
| Item | Specification |
|---|---|
| Processing Capacity | 1,000 / 2,000 / 3,000 / 5,000 / 10,000 L/H by size level |
| Working Pressure | Approximately -0.098 to -0.08 MPa, adjustable |
| Total Motor Power | 4.5 / 4.5 / 5.5 / 7.5 / 7.5 kW by size level |
| Dimensions (L*W*H) | From 1.0*0.75*2.8 m (1,000 L/H) to 1.7*1.8*3.6 m (10,000 L/H) |
| Weight | 220 – 400 kg by size level |
| Vacuum Breaking Device | Dedicated device for controlled vacuum release |
| Feed Design | Inclined inlet forming a vortex to improve the deaeration effect |
| Discharge Design | Inclined outlet for stable discharge under vacuum |
| Working Cycle | Working time and cycle adjustable to the requirement |
| Application Scope | Product liquid deaeration and water system deoxygenation |
For reference only. Detailed parameters, material selection, vacuum pump arrangement, and control configuration depend on the process and are confirmed with the buyer.
- Removing dissolved oxygen limits browning in syrup and concentrate
- The syrup base arrives at carbonation with a controlled oxygen background
- The adjustable vacuum level suits high-concentration liquids
- Working time and cycle are adjustable between syrup batches
- Cleaning and configuration details are confirmed with the buyer
Syrup and concentrate plants deaerate the high-concentration liquid so that dissolved oxygen does not work on it during storage and dilution. Soft drink syrup rooms run the deaerator before the syrup is blended with water and carbonated, high fructose corn syrup and starch sugar plants treat the syrup, reconstituted juice plants deaerate the concentrate after dilution, and flavored syrup and seasoning concentrate plants run the same step.
Soft drink producers, syrup suppliers, and concentrate processors use the deaerator when the carbonation line needs a syrup base with controlled oxygen for precise carbonation, when concentrate is held before dilution and browning has to be limited, when a high-concentration liquid needs an adjustable vacuum level so that it does not over-evaporate or foam under vacuum, or when several syrup varieties alternate and the working cycle and cleaning arrangement are adjusted between runs.