Vacuum Degassing Tank for Can Filling and High Temperature Sterilization Lines
Can Filling Vacuum Deaerator
,Degassing Vacuum Deaerator
,Degassing boiler deaerator tank
A vacuum deaerator removes air and dissolved oxygen from liquid products and process water under vacuum. Deaerating the product liquid inhibits browning and the oxidation of pigments, vitamins, and flavor components, removes the micro gas bubbles attached to suspended particles that make them float, prevents foaming during canning and high-temperature sterilization, and reduces corrosion on the inner walls of containers and system components.
In water systems, removing oxygen lowers aerobic corrosion and extends equipment life, and removing gas keeps heat exchanger surfaces free of attached bubbles so that heat transfer efficiency is maintained. The machine features an adjustable vacuum level with a dedicated vacuum breaking device, an inclined inlet that forms a vortex to improve the deaeration effect, an inclined outlet that keeps the discharge stable under vacuum, and a working time and cycle that can be adjusted to the requirement.
Size levels cover processing capacities from 1,000 to 10,000 L/H for reference, and the detailed parameters are confirmed with the buyer according to the process.
Foam at the filler is the reason for drip losses, uneven fill levels, and packages that have to be corrected by hand. The liquid that reaches the filling valve is degassed first, so that the filler can run at line speed without the product foaming over the rim. This is the standard arrangement on lines where the product is sensitive to foaming.
Foam inside a package during high-temperature sterilization can leave part of the product less evenly reached by the heat, which is why products that foam easily are degassed before they are sealed. The degassing tank removes the gas that would otherwise be released inside the package, and the same step reduces the corrosion that oxygen promotes on the inner walls of containers and system components.
The machine keeps the vacuum process stable next to a filling line. The inclined outlet prevents unstable discharge under vacuum, so the degassed liquid leaves the tank in a steady flow, the working time and cycle are adjustable to the line schedule, and the dedicated vacuum breaking device brings the tank back to atmosphere in a controlled way between cycles.
| Item | Specification |
|---|---|
| Processing Capacity | 1,000 / 2,000 / 3,000 / 5,000 / 10,000 L/H by size level |
| Working Pressure | Approximately -0.098 to -0.08 MPa, adjustable |
| Total Motor Power | 4.5 / 4.5 / 5.5 / 7.5 / 7.5 kW by size level |
| Dimensions (L*W*H) | From 1.0*0.75*2.8 m (1,000 L/H) to 1.7*1.8*3.6 m (10,000 L/H) |
| Weight | 220 – 400 kg by size level |
| Vacuum Breaking Device | Dedicated device for controlled vacuum release |
| Feed Design | Inclined inlet forming a vortex to improve the deaeration effect |
| Discharge Design | Inclined outlet for stable discharge under vacuum |
| Working Cycle | Working time and cycle adjustable to the requirement |
| Application Scope | Product liquid deaeration and water system deoxygenation |
For reference only. Detailed parameters, material selection, vacuum pump arrangement, and control configuration depend on the process and are confirmed with the buyer.
- Gas is removed before filling so the filler runs without foam and drips
- Degassed packages stay stable through high-temperature sterilization
- Removing oxygen reduces corrosion on container inner walls
- The inclined outlet keeps discharge steady under vacuum
- Vacuum level and cycle are adjustable to the line schedule
Canning and high-temperature sterilization lines degas the liquid before filling so that the product enters the package without entrained gas. Canned drink plants put the degassing tank ahead of the can or bottle filler, canned food plants treat liquid and soup-type products, retort product plants degas before the sterilization step, and hot-fill lines run the same step before the product reaches the filler.
Line expansion projects, retort product producers, and filling equipment integrators use the degassing tank when a high-speed filler has to run without foam and drip losses, when products that foam easily are processed in a sterilizer and the heat has to reach the product evenly, when the package should be filled without air pockets that could react with the product during storage, or when hot-filled PET or glass bottles need a stable fill without gas.