Vacuum Deaerator for Milk and Dairy Processing Lines
Milk deaerator storage tank
,SUS304 deaerator storage tank
,SUS304 deaerator tank for boiler
A vacuum deaerator removes air and dissolved oxygen from liquid products and process water under vacuum. Deaerating the product liquid inhibits browning and the oxidation of pigments, vitamins, and flavor components, removes the micro gas bubbles attached to suspended particles that make them float, prevents foaming during canning and high-temperature sterilization, and reduces corrosion on the inner walls of containers and system components.
In water systems, removing oxygen lowers aerobic corrosion and extends equipment life, and removing gas keeps heat exchanger surfaces free of attached bubbles so that heat transfer efficiency is maintained. The machine features an adjustable vacuum level with a dedicated vacuum breaking device, an inclined inlet that forms a vortex to improve the deaeration effect, an inclined outlet that keeps the discharge stable under vacuum, and a working time and cycle that can be adjusted to the requirement.
Size levels cover processing capacities from 1,000 to 10,000 L/H for reference, and the detailed parameters are confirmed with the buyer according to the process.
In a dairy line the deaeration step is placed after filtration and before homogenization and sterilization, the point where the milk liquid has been blended but has not yet reached its final heat treatment. Removing the air and dissolved oxygen here protects the product through the rest of the process. The same position is used for pasteurized milk, dairy drinks, and the base mix of fermented products, and the deaerator is selected according to the capacity of the line.
Oxygen carried in the milk liquid is the background of fat oxidation and off-flavor development in dairy products, and it also works on color and flavor components during high-temperature treatment. Removing it before the heat steps reduces the oxidation load on the product. In addition, deaerated liquid foams less during filling and high-temperature sterilization, which keeps the process stable and the packages consistent.
Dairy plants run several batches a day, and the working time and cycle of the machine can be adjusted to the batch. The vacuum level is adjustable so that the treatment can be set for the product, and the dedicated vacuum breaking device brings the tank back to atmosphere in a controlled way when a cycle ends. The inclined outlet keeps the discharge stable under vacuum so that the next step of the line receives an even flow.
| Item | Specification |
|---|---|
| Processing Capacity | 1,000 / 2,000 / 3,000 / 5,000 / 10,000 L/H by size level |
| Working Pressure | Approximately -0.098 to -0.08 MPa, adjustable |
| Total Motor Power | 4.5 / 4.5 / 5.5 / 7.5 / 7.5 kW by size level |
| Dimensions (L*W*H) | From 1.0*0.75*2.8 m (1,000 L/H) to 1.7*1.8*3.6 m (10,000 L/H) |
| Weight | 220 – 400 kg by size level |
| Vacuum Breaking Device | Dedicated device for controlled vacuum release |
| Feed Design | Inclined inlet forming a vortex to improve the deaeration effect |
| Discharge Design | Inclined outlet for stable discharge under vacuum |
| Working Cycle | Working time and cycle adjustable to the requirement |
| Application Scope | Product liquid deaeration and water system deoxygenation |
For reference only. Detailed parameters, material selection, vacuum pump arrangement, and control configuration depend on the process and are confirmed with the buyer.
- The step fits between filtration and homogenization or sterilization in the dairy line
- Removing dissolved oxygen limits the oxidation load on fat and flavor components
- Deaerated liquid foams less at filling and high-temperature sterilization
- Vacuum level and working cycle are adjustable for the batch
- The inclined outlet keeps discharge stable under vacuum
Vacuum deaeration is placed in dairy processing before homogenization and sterilization, where the milk liquid still carries dissolved oxygen from reception and blending. Pasteurized milk plants deaerate the milk before the sterilization step, dairy drink plants treat the blended liquid before UHT, yogurt and fermented milk plants deaerate the base mix before fermentation, and recombined milk plants run the tank after powder reconstitution.
Liquid milk producers, whole-line project teams, and dairy equipment suppliers use the deaerator when the line includes UHT or high-temperature treatment where oxidation can affect color and flavor, when the milk liquid carries gas that can disturb the homogenizer, when the product tends to foam at filling and the fill level becomes hard to control, or when several batches per day ask for an adjustable working cycle.
Yes. We build equipment to your required output in liters per hour or units per hour.
Yes. We can also send engineers to your site for hands-on installation, commissioning, and operator training.
Yes. We can supply complete turnkey lines including all processing equipment.
Yes. Factory visits are welcome. Our factory is located in Fengxian District, Shanghai, China, a 40-minute drive from Shanghai Pudong International Airport. Please contact us to schedule your visit. Video factory tours are also available for customers who cannot travel.