Industrial Fermentation Tank for Large Dairy Plants
Working Volume Up to 50000 L
,S31603 Contact Surfaces Hygiene
,Jacket Heat Transfer Temperature Control
Stainless steel fermentation tanks designed for dairy, beverage, and alcohol fermentation processes requiring an aseptic environment. The vessel incorporates an aseptic system with sterile breathing port or positive-pressure system to prevent contamination from airborne microorganisms, protecting the process through filling, fermentation, and discharge.
The series covers working volumes from 300 to 50,000 L, with pilot units from 300 to 4,000 L and industrial units up to 50,000 L, featuring a filling ratio of 65% to 90%. Product-contact parts are manufactured in SUS316 with other structural parts in SUS304, featuring inner surface finish of Ra 0.28 to 0.6 μm and outer finish of Ra 0.6 to 0.8 μm. The tank interior is designed without dead corners for optimal cleaning.
Designed to support large dairy plant production volumes, the series supports industrial working volumes up to 50,000 L with filling ratios of 65% to 90%, covering batch sizes used in scaled-up yogurt and fermented milk production. S31603 product-contact surfaces and dead-corner-free design support cleaning and reduce contamination risk in repeated batch operations.
Critical temperature management for large vessels is achieved through jacket heat transfer with automatic circulating water control and digital PID signal processing. Temperature is measured with Pt100 sensor over 0 to 150°C and controlled over 15 to 45°C with accuracy of ±0.2°C.
Top-entry mechanical stirring operates at 50 to 400 rpm depending on vessel size, featuring two levels of six-blade straight-leaf impellers, four baffles, and defoaming paddle. The agitator is sealed with single-end or double-end mechanical seal for reliable performance.
Tank design pressure ranges from 0.1 to 1.0 MPa and jacket pressure from 0.1 to 1.6 MPa. Working volume, pressure, and control configuration can be manufactured to customer requirements. For whole-line projects, fermentation tanks are planned together with pasteurization and filling sections to ensure capacity fits the overall production line, with installation and commissioning support available.
| Parameter | Specification |
|---|---|
| Working Volume | 10 - 50,000 L (experimental 5-200 L; pilot 300-4,000 L; industrial scale) |
| Filling Ratio | 65% - 90% |
| Product-Contact Material | SUS316 |
| Other Structural Material | SUS304 |
| Inner Surface Finish | Ra 0.28 - 0.6 μm |
| Outer Surface Finish | Ra 0.6 - 0.8 μm |
| Tank Design Pressure | 0.1 - 1.0 MPa |
| Jacket Design Pressure | 0.1 - 1.6 MPa |
| Jacket Type | Dimple plates or labyrinth jacket |
| Agitation | Top-entry mechanical stirring; 50 - 400 rpm depending on vessel size |
| Impellers and Baffles | Two levels of six-blade straight-leaf impellers; 4 baffles; defoaming paddle |
| Mechanical Seal | Single-end or double-end |
| pH Control | Range 2 - 12; measurement accuracy ±0.01; control accuracy ±0.1 |
| DO Control | Range 0 - 100% or 0 - 200%; accuracy ±1%; linked with agitation speed |
| Temperature Control | Pt100 sensor; measurement 0 - 150°C; control 15 - 45°C; accuracy ±0.2°C; PID digital signal processing |
| Sterilization | SIP in place with steam; manual control standard, automatic optional |
| Air Filtration | Sterile-grade 0.2 μm filter elements on inlet and exhaust |
| Feeding and Foam Control | Peristaltic pumps for feeding and defoaming agent addition |
| Inoculation | Alcohol flame or differential pressure |
| Valves | Sterilizable sampling valve and tank bottom valve |
| Sight Glass and Light | Side observation sight glass; 12V safety light |
| Control Interface | PLC-based control system; 10.4-inch color touch screen; Chinese and English interface |
| Aseptic Design | Sterile breathing port or sterile positive-pressure system |
| Design Features | Modular design; open pipe rack for valve and pipe maintenance |
- Working volumes up to 50,000 L support scaled-up production
- S31603 contact surfaces and dead-corner-free design meet dairy hygiene requirements
- Jacket heat transfer with circulating water manages large-vessel temperature
- Mechanical seals protect the agitator drive in repeated batch duty
- Working volume and pressure can be manufactured to customer requirements
- Large dairy plants running scaled-up yogurt and fermented milk fermentation batches
- High-capacity dairy lines selecting an industrial fermentation tank matched to line volume
- Whole-line projects planning the fermentation tank together with pasteurization and filling sections
- Dairy plants expanding fermentation capacity with additional industrial tanks