Fermentation Tank For Dairy And Yogurt Production Fermenter
300L ss fermentation tanks
,500000L ss fermentation tanks
,300L coffee fermentation tank
Stainless steel fermentation tanks are used in dairy, beverage, and alcohol fermentation processes where an aseptic environment is required. The vessel incorporates an aseptic system with a sterile breathing port or a sterile positive-pressure system to prevent contamination from airborne microorganisms, and the process is protected through filling, fermentation, and discharge.
The series covers working volumes from 300 to 50,000 L, with pilot units from 300 to 4,000 L, and industrial units up to 50,000 L, and a filling ratio of 65% to 90%. Product-contact parts are manufactured in S31603, other structural parts in S30408, with an inner surface finish of Ra 0.28 to 0.6 μm and an outer finish of Ra 0.6 to 0.8 μm; the tank interior is designed without dead corners.
Fermentation is the step where yogurt and fermented milk develop their characteristic properties, and the process must stay protected from airborne contamination. The fermentation tank incorporates an aseptic system with a sterile breathing port or a sterile positive-pressure system, and the vessel is sterilized in place with steam before each batch.
The series covers working volumes from 300 to 50,000 L, pilot units from 300 to 4,000 L, and industrial units up to 50,000 L, so the size is selected according to the production scale.
Process control covers pH, dissolved oxygen, temperature, foam, and feeding through a PLC-based control system with a 10.4-inch color touch screen and a switchable Chinese and English interface. pH is controlled over 2 to 12 with a measurement accuracy of ±0.01, DO over 0 to 100% or 0 to 200% with an accuracy of ±1%, and temperature over 15 to 45 °C with an accuracy of ±0.2 °C through digital PID signal processing.
Peristaltic pumps handle feeding and defoaming agent addition, and automatic alarm functions cover the main process points.
Product-contact parts are manufactured in S316 with an inner surface finish of Ra 0.28 to 0.6 μm, and the tank interior is designed without dead corners to support cleaning and reduce contamination risk. Inlet and exhaust air pass through sterile-grade 0.2 μm filter elements.
For dairy plants producing yogurt and fermented milk, the fermentation tank is selected together with the pasteurization and filling steps so that the process sequence stays consistent from batch to batch.
For reference; final specifications depend on process requirements
| Parameter | Specification |
|---|---|
| Working Volume | 300 - 50,000 L (pilot 300-4,000 L; industrial scale) |
| Filling Ratio | 65% - 90% |
| Inner Surface Finish | Ra 0.28 - 0.6 μm |
| Outer Surface Finish | Ra 0.6 - 0.8 μm |
| Tank Design Pressure | 0.1 - 1.0 MPa |
| Jacket Design Pressure | 0.1 - 1.6 MPa |
| Jacket Type | Dimple plates or labyrinth jacket |
| Agitation | Top-entry mechanical stirring; 50 - 400 rpm depending on vessel size |
| Impellers and Baffles | Two levels of six-blade straight-leaf impellers; 4 baffles; defoaming paddle |
| Mechanical Seal | Single-end or double-end |
| pH Control | Range 2 - 12; measurement accuracy ±0.01; control accuracy ±0.1 |
| DO Control | Range 0 - 100% or 0 - 200%; accuracy ±1%; linked with agitation speed |
| Temperature Control | Pt100 sensor; measurement 0 - 150 °C; control 15 - 45 °C; accuracy ±0.2 °C; PID digital signal processing |
| Sterilization | SIP in place with steam; manual control standard, automatic optional |
| Air Filtration | Sterile-grade 0.2 μm filter elements on inlet and exhaust |
| Feeding and Foam Control | Peristaltic pumps for feeding and defoaming agent addition |
| Inoculation | Alcohol flame or differential pressure |
| Valves | Sterilizable sampling valve and tank bottom valve |
| Sight Glass and Light | Side observation sight glass; 12V safety light |
| Control Interface | PLC-based control system; 10.4-inch color touch screen; Chinese and English interface |
| Aseptic Design | Sterile breathing port or sterile positive-pressure system |
| Design Features | Modular design; open pipe rack for valve and pipe maintenance |
*The working volume, pressure, agitation, and control configuration can be manufactured according to customer requirements.
- The aseptic system protects the fermentation process from airborne contamination.
- SIP sterilization with steam keeps the vessel ready for each batch.
- Automated pH, DO, and temperature control supports batch consistency.
- S316 contact surfaces and dead-corner-free design meet dairy hygiene requirements.
- Working volume can be selected from 300 to 50,000 L by production scale.
- Yogurt plants using a fermentation tank for the fermentation step of yogurt and fermented milk production.
- Dairy plants matching the fermentation tank to the pasteurization and filling steps for a consistent process sequence.
- Fermented milk producers running regular batches with automated pH, DO, and temperature control.
- Regional dairy producers standardizing one fermentation tank range across their product lines.