Stainless Steel Fermentation Tank for Dairy and Beverage Plants
SUS304 Stainless Fermentation Tank
,ISO9001 Stainless Fermentation Tank
,ISO9001 fermentation vessel beer
Stainless steel fermentation tanks are used in dairy, beverage, and alcohol fermentation processes where an aseptic environment is required. The vessel incorporates an aseptic system with a sterile breathing port or a sterile positive-pressure system to prevent contamination from airborne microorganisms, and the process is protected through filling, fermentation, and discharge.
Dairy and beverage plants come in different scales, and our stainless steel fermentation tank range is designed to cover this spread. Working volumes run from 10 to 50,000 L, with experimental units from 5 to 200 L, pilot units from 300 to 4,000 L, and industrial units up to 50,000 L, allowing plants to select the size that fits their batch requirements. The modular design keeps installation flexible, and the compact footprint suits plants with limited process room.
The tank provides comprehensive control for fermentation processes: pH control over 2 to 12 with measurement accuracy of ±0.01, DO control over 0 to 100% or 0 to 200% with accuracy of ±1% and linkage with agitation speed, and temperature control over 15 to 45 °C with accuracy of ±0.2 °C through digital PID signal processing. Peristaltic pumps handle feeding and defoaming agent addition, and the PLC-based control system with color touch screen and switchable Chinese/English interface keeps all setpoints and alarms centralized.
The open pipe rack design provides ample space for valve and pipe operation during maintenance. The vessel is constructed with product-contact parts in S31603 stainless steel, inner surface finish of Ra 0.28 to 0.6 μm, and a dead-corner-free interior. Inlet and exhaust air pass through sterile-grade 0.2 μm filter elements, and working volume, pressure, and control configuration can be manufactured according to customer requirements.
| Parameter | Specification |
|---|---|
| Working Volume | 10 – 50,000 L (experimental 5–200 L; pilot 300–4,000 L; industrial scale) |
| Filling Ratio | 65% – 90% |
| Product-Contact Material | S31603 |
| Other Structural Material | S30408 |
| Inner Surface Finish | Ra 0.28 – 0.6 μm |
| Outer Surface Finish | Ra 0.6 – 0.8 μm |
| Tank Design Pressure | 0.1 – 1.0 MPa |
| Jacket Design Pressure | 0.1 – 1.6 MPa |
| Jacket Type | Dimple plates or labyrinth jacket |
| Agitation | Top-entry mechanical stirring; 50 – 400 rpm depending on vessel size |
| pH Control | Range 2 – 12; measurement accuracy ±0.01; control accuracy ±0.1 |
| DO Control | Range 0 – 100% or 0 – 200%; accuracy ±1%; linked with agitation speed |
| Temperature Control | Pt100 sensor; measurement 0 – 150 °C; control 15 – 45 °C; accuracy ±0.2 °C |
| Sterilization | SIP in place with steam; manual control standard, automatic optional |
| Air Filtration | Sterile-grade 0.2 μm filter elements on inlet and exhaust |
| Control Interface | PLC-based control system; 10.4-inch color touch screen; Chinese and English interface |
*The working volume, pressure, agitation, and control configuration can be manufactured according to customer requirements.
- Working volumes from 10 to 50,000 L cover different plant scales
- Modular design and compact footprint fit different process rooms
- Open pipe rack design eases valve and pipe maintenance
- Complete pH, DO, temperature, foam, and feeding control in one system
- Working volume and pressure can be manufactured to customer requirements
- Dairy and beverage plants selecting a general-purpose fermentation tank for different product batches
- Regional producers covering several product lines with one fermentation tank range
- Plants planning a first fermentation line with a tank matched to the process room
- Beverage plants running fermentation batches with complete process control and easy maintenance