Extraction Tank for Coffee and Tea Processing
coffee extraction tank
,extraction tank for coffee
,tea extraction tank
An extraction tank is used to extract soluble components from plant and food materials with water, alcohol, or other media. The vessel is manufactured in SUS304-2B stainless steel with a SUS304 matte outer surface, and the steam heating jacket with PU foam and aluminum silicate blanket insulation maintains the required process temperature.
The range covers eight standard size levels with total volumes from 650 to 11,000 L, and custom volumes are available on request. The tank design pressure is below 0.1 MPa with jacket pressure up to 0.3 MPa. The top-mounted paddle stirrer supports dynamic or static extraction, and the vessel is available in upright conical, mushroom, straight cylinder, oblique cone, and inverted cone forms.
A complete system includes the main vessel, an entrainment separator to prevent foam and residue carryover, a condenser, a cooler, an oil-water separator, and a gas-liquid separator. Standard accessories include a CIP rotating spray ball, a sight glass with explosion-proof light, a quick-opening charging port, high and low level sensors, and a cylinder control desk with pneumatic residue discharge gate.
Roasted coffee and tea leaves are both extracted with hot water using this specialized extraction tank. The steam heating jacket with PU foam and aluminum silicate blanket insulation brings the charge to the extraction temperature and maintains it, while the top-mounted paddle stirrer ensures even contact between material and water for uniform batch extraction.
The range covers total volumes from 650 to 11,000 L in eight size levels, allowing selection according to workshop batch size requirements or custom volumes upon request.
Extraction of coffee or tea in boiling water produces foam that can carry fine residue into the condensing chain if allowed to escape. The entrainment separator breaks the foam before it leaves the vessel, keeping the condensing chain clean. The condenser and cooler convert vapor back to liquid, while the gas-liquid separator protects the vent line.
At the end of each batch, the pneumatic residue discharge gate with a discharge port from 500 to 1000 mm quickly removes spent grounds and leaves, minimizing downtime between batches.
The quick-opening charging port (350-500 mm) accepts fresh material, and the CIP rotating spray ball rinses the vessel between coffee and tea batches to maintain flavor purity. The configuration supports both dynamic extraction with the stirrer running and static extraction without it. Size level and configuration are confirmed with the buyer based on specific requirements.
For reference only; final specifications depend on process requirements:
| Item | Specification |
|---|---|
| Total Volume | 650 - 11,000 L in standard sizes (0.5 to 10 m³); custom volumes available on request |
| Vessel Material | SUS304-2B stainless steel |
| Outer Surface | SUS304 matte finish |
| Tank Design Pressure | Below 0.1 MPa |
| Jacket Design Pressure | Up to 0.3 MPa |
| Compressed Air Pressure | 0.6 - 0.7 MPa |
| Heating | Steam heating jacket; PU foam and aluminum silicate blanket insulation |
| Heating Area | 2.7 - 15 m² |
| Condensing Area | 3 - 15 m² |
| Cooling Area | 0.5 - 1.5 m² |
| Agitation | Top-mounted paddle stirrer (dynamic or static extraction) |
| Vessel Forms | Upright conical, mushroom, straight cylinder, oblique cone, inverted cone |
| Feeding Port | 350 - 500 mm |
| Residue Discharge Port | 500 - 1000 mm (pneumatic discharge gate) |
| System Components | Main vessel, entrainment separator, condenser, cooler, oil-water separator, gas-liquid separator, stirrer |
| Accessories | CIP rotating spray ball, explosion-proof sight light with sight glass, quick-opening charging port, high and low level sensors, cylinder control desk |
| Process Compatibility | Water extraction, alcohol extraction, oil extraction, steaming, solvent recovery |
The size level, vessel form, and system configuration are selected according to process and plant conditions; custom volumes are available on request.
- Water extraction of roasted coffee and tea leaves in one vessel
- Steam heating jacket maintains even extraction temperature
- Entrainment separator prevents foam and residue from entering the condensing chain
- Pneumatic discharge gate quickly removes spent grounds and leaves
- CIP rinsing supports changeover between coffee and tea batches
Ready-to-drink coffee and tea products rely on extracted liquid, and this extraction tank is essential where raw materials meet hot water. Coffee plants extract roasted and ground beans to prepare coffee concentrate and liquid bases for ready-to-drink coffee. Tea producers extract leaves for concentrated tea liquid used in bottled tea drinks. Beverage plants manufacturing both product families prepare their coffee and tea bases in the same workshop.
Regional coffee and tea beverage producers, ready-to-drink product plants, and suppliers of liquid bases to beverage brands require this tank when preparing their own coffee or tea extract instead of purchasing concentrate, when batches of roasted coffee or tea leaves require even water extraction, when spent material must be discharged quickly to maintain flavor purity in subsequent batches, or when coffee and tea production runs alternate in one workshop with routine rinsing between them.
Yes. We build equipment to your required output in liters per hour or units per hour.
Yes. We can also send engineers to your site for hands-on installation, commissioning, and operator training.
Yes. We can supply complete turnkey lines including all processing equipment.
Yes. Factory visits are welcome. Our factory is located in Fengxian District, Shanghai, China, a 40-minute drive from Shanghai Pudong International Airport. Please contact us to schedule your visit. Video factory tours are also available for customers who cannot travel.