Extraction Tank for Tea and Herbal Processing
650L herbal extraction plant
,herbal extraction plant Tank
,650L extracting tank
An extraction tank is used to extract soluble components from plant and food materials with water, alcohol, or other media. The vessel is manufactured in SUS304-2B stainless steel with a SUS304 matte outer surface, and the steam heating jacket with PU foam and aluminum silicate blanket insulation maintains the required process temperature.
The range covers eight standard size levels with total volumes from 650 to 11,000 L, and custom volumes are available on request. The tank design pressure is below 0.1 MPa with jacket pressure up to 0.3 MPa. The top-mounted paddle stirrer supports dynamic or static extraction, and the vessel is available in upright conical, mushroom, straight cylinder, oblique cone, and inverted cone forms.
A complete system includes the main vessel, an entrainment separator to prevent foam and residue carryover, a condenser, a cooler, an oil-water separator, and a gas-liquid separator. Standard accessories include a CIP rotating spray ball, a sight glass with explosion-proof light, a quick-opening charging port, high and low level sensors, and a cylinder control desk with pneumatic residue discharge gate.
Water extraction is the primary method for tea and herbal materials. The steam heating jacket with PU foam and aluminum silicate blanket insulation brings the charge to the extraction temperature and maintains it, while the top-mounted paddle stirrer ensures even contact between material and water for uniform batch heating.
Plant material decoction produces foam that can carry residue into the condenser and contaminate the condensate. The entrainment separator breaks foam before it leaves the vessel, keeping the condenser clean during boiling. The pneumatic residue discharge gate with a 500 to 1000 mm port quickly removes spent material, reducing downtime between batches.
Workshops processing multiple plant varieties benefit from a vessel that can switch between materials. The quick-opening charging port (350-500 mm) accepts fresh material, and the CIP rotating spray ball rinses the vessel between varieties. The configuration supports both dynamic extraction with stirrer operation and static extraction without it.
| Item | Specification |
|---|---|
| Total Volume | 650 – 11,000 L in standard sizes (0.5 to 10 m³); custom volumes available on request |
| Vessel Material | SUS304-2B stainless steel |
| Outer Surface | SUS304 matte finish |
| Tank Design Pressure | Below 0.1 MPa |
| Jacket Design Pressure | Up to 0.3 MPa |
| Compressed Air Pressure | 0.6 – 0.7 MPa |
| Heating | Steam heating jacket; PU foam and aluminum silicate blanket insulation |
| Heating Area | 2.7 – 15 m² |
| Condensing Area | 3 – 15 m² |
| Cooling Area | 0.5 – 1.5 m² |
| Agitation | Top-mounted paddle stirrer (dynamic or static extraction) |
| Vessel Forms | Upright conical, mushroom, straight cylinder, oblique cone, inverted cone |
| Feeding Port | 350 – 500 mm |
| Residue Discharge Port | 500 – 1000 mm (pneumatic discharge gate) |
| System Components | Main vessel, entrainment separator, condenser, cooler, oil-water separator, gas-liquid separator, stirrer |
| Accessories | CIP rotating spray ball, explosion-proof sight light with sight glass, quick-opening charging port, high and low level sensors, cylinder control desk |
| Process Compatibility | Water extraction, alcohol extraction, oil extraction, steaming, solvent recovery |
The size level, vessel form, and system configuration are selected according to the process and plant conditions; custom volumes are available on request.
- The steam heating jacket maintains even extraction temperature
- The entrainment separator prevents foam and residue from reaching the condenser
- The pneumatic discharge gate with 500-1000 mm port quickly clears spent material
- Eight size levels from 650 to 11,000 L accommodate different batch scales
- One vessel can switch between multiple plant varieties with CIP rinsing
Extraction with water is the standard method for tea and herbal materials. This extraction tank is used in workshops where plant material meets hot water. Tea and tea extract producers use it for tea concentrate and polyphenol preparation, herbal slice plants and extraction workshops use it for decoctions and concentrates, and botanical raw material processors use it for plant material leaching. Sugar processors can also use the same vessel for beet and cane diffusion.
Plant extract producers, herbal pre-treatment workshops, and upstream tea drink ingredient plants require this tank when material is leached in water in volume, when boiling produces heavy foam that must be broken before reaching the condenser, when spent material must be discharged quickly to reduce downtime, or when multiple plant varieties rotate through one workshop.
Yes. We build equipment to your required output in liters per hour or units per hour.
Yes. We can also send engineers to your site for hands-on installation, commissioning, and operator training.
Yes. We can supply complete turnkey lines including all processing equipment.
Yes. Factory visits are welcome. Our factory is located in Fengxian District, Shanghai, China, a 40-minute drive from Shanghai Pudong International Airport. Please contact us to schedule your visit. Video factory tours are also available for customers who cannot travel.