Industrial Pouch Filling Machine For Three Side Seal Liquid Bags Packing 30kW
Industrial Pouch Filling Machine
,30kW Pouch Filling Machine
,30kW pouch filling and packing machine
This industrial pouch filling machine is designed for liquid products that require film feeding, bag forming, liquid filling, three-side sealing, and pouch output in a single machine route. The film is supplied to the forming section, the liquid is delivered through the filling system, and the formed pouch is sealed before it leaves the equipment. Touchscreen control and alarm indication support the operating interface selected for the confirmed project.
The machine is focused on the pouch filling boundary. It does not represent a complete liquid processing line, product preparation system, UHT plant, sterilization system, homogenization system, CIP system, or downstream case-packing line. An upstream liquid source, product transfer route, film supply, and downstream pouch handling can be connected when included in the project scope. This clear boundary allows buyers to evaluate the equipment as a dedicated pouch forming, filling, and sealing solution.
Film material, film width, film thickness, sealable layer, bag length, liquid temperature, viscosity, foam, particles, and filling conditions affect the application review. The three-side seal structure is selected for the confirmed pouch design. Bag length and seal or cut settings can be discussed with the film and package information. Filling volume adjustment is available as a project function, while the usable range depends on the liquid, film, pouch dimensions, filling method, and selected configuration.
Dual filling heads are included as an equipment direction. The liquid distribution route, filling-head arrangement, product inlet, and cleaning access are reviewed according to the product. The presence of two filling heads does not define a guaranteed output or filling result. The liquid properties and pouch format should be reviewed before the final operating arrangement is established. A project can also include touchscreen controls, alarm indication, bag output, and interface coordination for the surrounding equipment.
The equipment can be considered for liquid food, non-carbonated beverage, sauce, dairy liquid, or another project-confirmed liquid. Product compatibility is not assumed from the machine classification. The project discussion should include liquid temperature, viscosity, foam behavior, particles, required bag volume, film material, seal conditions, and intended handling route. UHT process connection can be discussed as an interface when the customer has a separate UHT process, but the machine itself is not presented as a complete UHT or aseptic processing system.
Workshop planning can consider film loading, operator access, liquid inlet, compressed-air routing, pouch discharge, alarm access, cleaning coordination, maintenance space, and downstream connection. Installation coordination, commissioning, operator guidance, process interface review, workshop layout planning, and full-set technical support can be discussed according to the confirmed project. The final equipment scope follows the pouch, liquid, utilities, and site information supplied by the customer.
The film route can be discussed around film adaptability, film tension, and forming control for the selected material. Touchscreen settings may cover temperature, operating speed, bag length, seal-cut position, and filling volume according to project requirements. Pneumatic actuation, material monitoring, optical tracking and positioning, and alarm indication can be reviewed with the required operating interface. Different film thicknesses and sealing conditions are evaluated before the final pouch arrangement is confirmed.
This machine can be considered for confirmed liquid food and liquid beverage pouch projects requiring three-side sealing. It is suitable for projects evaluating film feeding, bag forming, adjustable liquid filling, dual filling heads, touchscreen operation, alarm indication, and pouch output. Liquid temperature, viscosity, foam, particles, film, pouch dimensions, and sealing conditions require project review.
The upstream liquid preparation system, UHT process, product treatment, CIP, and downstream packing are separate interfaces unless specifically included in the project scope.
| Model | Bag Capacity Range | Reference Capacity | Filling Heads | Seal Format | Power | Compressed Air | Main Machine Size |
|---|---|---|---|---|---|---|---|
| WB64B-9000 | 100-500 mL | 4,500-9,000 bags/hour | 2 | Three-side seal | 30 kW | ≥0.6 MPa | 4,600*1,500*3,600 mm |
| WB64B-9000A | 500-1,000 mL | 2,500-3,000 bags/hour | 2 | Three-side seal | 30 kW | ≥0.6 MPa | 4,600*1,500*3,600 mm |
The two rows are attachment-based reference values for project comparison. Filling volume, bag capacity, and reference capacity require confirmation against the liquid, film, pouch, and operating conditions.
Project support can include film and pouch review, liquid condition discussion, filling-head interface review, compressed-air coordination, touchscreen and alarm discussion, workshop layout planning, installation coordination, commissioning, operator guidance, and full-set technical support. The final service scope follows the confirmed liquid and pouch project.
Yes. We build equipment to your required output in liters per hour or units per hour.
Yes. We can also send engineers to your site for hands-on installation, commissioning, and operator training.
Yes. We can supply complete turnkey lines including all processing equipment.
Yes. Factory visits are welcome. Our factory is located in Fengxian District, Shanghai, China, a 40-minute drive from Shanghai Pudong International Airport. Please contact us to schedule your visit. Video factory tours are also available for customers who cannot travel.