Aseptic Brick Pack Filling and Packaging Machine
aseptic brick pack filling and packaging machine
,brick pack beverage filling equipment
,liquid drink brick pack packaging
Product Overview
Aseptic Brick Pack Filling and Packaging Machine. This equipment is planned for confirmed liquid beverage projects that require a connected brick pack filling, closure, conveying, and downstream packaging route. Prepared liquid beverage is supplied to the equipment, product temperature conditioning is reviewed as required, brick packs are filled, closure or cap application is coordinated, and finished packages move by conveyor to the confirmed downstream packing interface.
The reference product filling temperature is 5-25°C, and main machine capacity is 16,000 pcs/hour. A separate 16,000-18,000 packages/hour reference requires project-level alignment of package counting and closure-system definitions before final use. The ±1% filling accuracy value is a reference subject to product, package, equipment, and test conditions. It is not an unconditional result guarantee. Brick pack volume and material are reviewed within the 200-2,000 mL project reference range.
Cap applicator, cap sorter, cap hoist, conveyor belt, closure, and downstream packing interfaces can be coordinated according to the package route. Upstream beverage preparation, filtration, homogenization, sterilization, cleaning, and downstream packing are reviewed as project interfaces rather than assumed fixed configurations. Power, compressed air, steam, softened water, and cooling water are checked against factory utilities. Automation and control can be configured according to project requirements. Workshop layout planning, installation coordination, commissioning, and full-set technical guidance can support the project.
Applications
This equipment can be considered for confirmed liquid beverage packaging projects, including fruit juice, tea beverage, coffee drink, protein drink, non-soda drink, and fruit wine. The product type, viscosity, particles or fiber, temperature, package volume, material, closure, utility conditions, and downstream route require project review. The page focuses on filling and packaging coordination rather than a specific beverage formula.
Line Modules
- Prepared beverage inlet. The liquid product connection is reviewed with the upstream process and transfer arrangement.
- Product conditioning interface. Product temperature and transfer conditions are checked according to the project.
- Aseptic brick pack filling section. The filling section is configured for the confirmed package route.
- Package forming and sealing interface. Brick pack forming and closure are coordinated with selected material and format.
- Cap applicator. A cap applicator can be reviewed when required by package design.
- Cap sorter. Cap sorting is coordinated with cap type and package supply.
- Cap hoist. Cap transfer is reviewed with the selected cap handling arrangement.
- Conveyor belt. The conveyor connects filled packages with discharge and downstream packing.
- Utility connections. Power, air, steam, softened water, and cooling water interfaces are reviewed for the site.
- Downstream packaging interface. Filled brick packs are transferred to the confirmed finished package route.
Process Flow
Prepared liquid beverage supply → product temperature conditioning as required → aseptic brick pack filling → sealing, capping, or package closure as configured → conveyor discharge → downstream packaging.
Upstream treatment, filtration, homogenization, sterilization, and cleaning are connected only when confirmed as project interfaces. Package volume, material, closure, utilities, and downstream packing are selected by application.
Equipment Parameters
| Parameter | Reference Value |
|---|---|
| Equipment Classification | Aseptic brick filling machine |
| Main Capacity | 16,000 pcs/hour |
| Filling Temperature | 5-25°C |
| Filling Accuracy | ±1%, subject to test conditions |
| Power Supply | 380±10 V, 50 Hz |
| Power | 42 kW |
| Compressed Air | 600-700 kPa; 450 L/min |
| Steam | 170±30 kPa; 125-140°C; 2.5 kg/h |
| Softened Water | 300-450 kPa; ≤30°C |
| Cooling Water | 300-450 kPa; ≤20°C |
| Main Machine Weight | 10,000 kg |
| Main Dimension | 6,150*3,768*5,500 mm |
| Conveyor | 21 m/min; height 825±50 mm |
| Brick Pack Range | 200-2,000 mL project reference |
| Cap Applicator | 3,100*1,000*2,000 mm |
| Cap Sorter | 1,100*1,600*2,000 mm |
| Cap Hoist | 800*2,000*2,700 mm |
| Cap Installation Size | 5,500*3,200*2,700 mm |
| Cap System Weight | 1,500 kg |
These are reference values. The 16,000-18,000 packages/hour closure-system reference requires project-level alignment with the main pcs/hour counting method. Product, package, closure, utilities, and test conditions are confirmed before final configuration.
Technical Guidance and Services
Support can include product and package interface review, closure selection, utility coordination, workshop layout planning, installation coordination, commissioning, and full-set technical guidance. Upstream process and downstream packing interfaces are reviewed according to the project.
Product FAQ
Q1: What applications can be reviewed for this equipment?
Confirmed fruit juice, tea beverage, coffee drink, protein drink, non-soda drink, and fruit wine applications can be reviewed. Final compatibility depends on product and package conditions.
Q2: Can closure and package interfaces be configured?
Yes. Brick pack material, volume, closure, cap handling, conveyor, utilities, and downstream packaging are reviewed according to the project.
Q3: Can the reference filling temperature and capacity be used for planning?
Yes. 5-25°C and 16,000 pcs/hour are reference values. Product, package, test conditions, and project configuration must be confirmed.
Q4: Can you provide installation and project guidance?
Yes. Project-based installation coordination, commissioning, operator support, workshop layout planning, and full-set technical guidance can be discussed.