Emulsifying Tank for Milk Powder Reconstitution with High Shear Rotor Stator Mixing
High Shear Mixing Disperses Milk Powder
,Lump-Free Reconstituted Milk Base
,Preparation Unit for Dairy Lines
An emulsifying tank is used in food and beverage preparation to dissolve powders and prepare emulsions and syrups. The tank combines a high-speed impeller bottom stirring device with a centrifugal high-speed emulsifying head, where materials are drawn downward and thrown at high speed toward the stator. This enables dissolving and emulsifying through high-speed shearing, collision, and crushing between the rotor and stator.
A tank-bottom anti-vortex baffle converts rotational force into an up-and-down tumbling force, supporting uniform mixing and preventing powder accumulation or clumping on the liquid surface. The range is used for dissolving and emulsifying sugar, milk powder, and gum and colloid additives, as well as for hydration and emulsification steps in production.
Available in working volumes of 500, 1000, and 2000 L with a rotation speed of 1440 r/min and motor power from 7.5 to 22 kW. Working volume and configuration are selected according to process requirements.
Recombined milk, fermented milk bases, and ice cream mixes all start from the same step: milk powder must be reconstituted into a smooth liquid base. The emulsifying tank is built for this step. The centrifugal emulsifying head draws the powder down from the surface and subjects it to high-speed shearing between the rotor and stator, while the bottom impeller keeps the entire volume in motion. The result is a base where the powder is properly dispersed and hydrated instead of floating on top.
Milk powder has a tendency to form lumps when it meets water, and lumps that survive the mixing step can carry into homogenization and cause rework. The tank-bottom anti-vortex baffle converts rotational force into an up-and-down tumbling force, keeping the powder moving through the liquid until it is fully wetted. For dairy plants, this reduces the number of batches that require filtering or reprocessing.
The range covers working volumes of 500, 1000, and 2000 L, with the tank arranged as the preparation unit feeding the homogenizing, pasteurizing, and fermenting steps of the dairy line. Configuration is matched to batch size and workshop layout, with working volume and power selected according to process requirements.
| Item | Specification |
|---|---|
| Working Volume | 500, 1000, and 2000 L |
| Rotation Speed | 1440 r/min |
| Motor Power | 7.5, 15, and 22 kW by volume |
| Dimensions (L*W*H) | 1250*1250*1750 / 1360*1360*1950 / 1650*1650*1950 mm |
| Bottom Agitation | High-speed impeller bottom stirring device |
| Emulsifying Head | Centrifugal high-speed emulsifying head (rotor and stator) |
| Mixing Action | High-speed shearing, collision, and crushing between rotor and stator |
| Anti-Vortex Baffle | Tank-bottom baffle converting rotational force into up-and-down tumbling force |
| Powder Handling | Prevents powder accumulation and clumping on the liquid surface |
| Main Uses | Dissolving and emulsifying sugar, milk powder, and gum additives; hydration and emulsification |
The working volume, motor power, and configuration are selected according to the process and plant conditions.
- High shear rotor stator mixing disperses milk powder without lumps
- The anti-vortex baffle keeps powder moving until it is fully hydrated
- A smooth reconstituted base supports the downstream homogenizing step
- Working volumes of 500 to 2000 L fit dairy blending workshops
- The tank is arranged as the preparation unit of the dairy line
Milk powder reconstitution is the first step of many dairy products, and this emulsifying tank is used in workshops where powder meets water. Dairy plants preparing recombined milk or fermented milk bases use it to build a smooth liquid base before homogenization, and ice cream plants use it to make liquid mix from powder, sugar, and stabilizers before aging and freezing.
Dairy beverage plants building milk-powder-based drinks reconstitute the base here first, and bakery and creamer plants hydrate milk powder for fillings and coffee creamer bases. Dairy blending workshops and recombined milk producers select this tank when powder must reconstitute consistently in every batch, when powder floats or forms lumps that would affect downstream homogenizing, when large-volume milk bases need quick preparation to avoid line delays, or when formulas combine milk powder with gums that should hydrate only after powder dispersion.