Multi Process Milk Production Line for Fresh Pasteurized UHT Milk
Multi Process One Line
,Shared Sections Less Investment
,Pasteurized UHT Dual Route
One line concept, three product paths. A dairy plant does not need to build a separate line for every milk type when the process sections can be organized around the product plan. This line is designed for plants that want to produce chilled fresh milk, pasteurized milk, and ambient UHT milk without duplicating the reception, standardization, homogenization, filling, and utility sections.
The line is organized around shared upstream sections and defined treatment paths. Raw milk reception, filtration and purification, standardization, blending, deaeration, and homogenization serve the whole plant. The treatment section can then be arranged for the selected route: low-temperature pasteurization at approximately 72 to 85 degrees Celsius for chilled fresh milk and pasteurized milk, or UHT treatment at approximately 135 to 150 degrees Celsius for about 2 to 5 seconds with aseptic filling for ambient milk. The chilled path is managed near 4 degrees Celsius, while the ambient path is stored without a cold chain. Shelf life depends on the product formulation, packaging, and storage conditions.
For reference; final specifications depend on process requirements. The capacity can be engineered to the customer's target output, and steam, installed power, and workshop area are determined according to the process, utilities, and plant conditions.
| Model | Hourly Output (bph) | Steam Consumption (KG) | Power (KW) | Area Required (m²) |
|---|---|---|---|---|
| SWGZ-2000 | 2000 bph | 500 KG | 100 KW | 500 m² |
| SWGZ-4000 | 4000 bph | 1000 KG | 150 KW | 800 m² |
| SWGZ-6000 | 6000 bph | 2000 KG | 200 KW | 1000 m² |
| SWGZ-10000 | 10000 bph | 3000 KG | 350 KW | 1500 m² |
| SWGZ-15000 | 15000 bph | 4000 KG | 420 KW | 2000 m² |
| SWGZ-24000 | 24000 bph | 6000 KG | 500 KW | 2500 m² |
| SWGZ-36000 | 36000 bph | 8000 KG | 600 KW | 3000 m² |
- One integrated line concept can cover fresh milk, pasteurized milk, and ambient UHT milk paths.
- Shared reception, standardization, homogenization, filling, and utility sections reduce duplicate equipment investment.
- The pasteurization and UHT routes are organized around the product plan, not around a single fixed product.
- Chilled-chain and ambient-storage paths can be planned in the same project.
- Capacity is engineered to the customer's target output with reference models from 2000 to 36000 bph.
This solution can be considered for dairy plants that plan to produce chilled fresh milk, pasteurized milk, and ambient UHT milk in one facility. It is especially suited to plants that want to reduce duplicate equipment investment while keeping product paths clearly organized. The complete route is planned around the buyer's product mix, target output, package formats, and plant conditions.
A: Yes. The line can be engineered to the required output, product mix, package format, workshop area, and utility conditions.
A: Yes. Installation and commissioning support can be arranged, together with practical operator guidance for the agreed line scope.
A: Yes. The complete route from reception to chilled or ambient storage can be coordinated as one project.
A: Yes. Factory visits are welcome at the Shangwang facility in Fengxian District, Shanghai, China. Video factory tours are also available for customers who cannot travel.